Owner's Manual

POD Farm 2 Advanced User Guide – Driver Panel & Recording
3•10
You can specify different mix settings for each pair of UX8 outputs if you like. By default, the only
sounds that come out of the UX8 are the computer’s output and POD Farm 2 Record Send 9-10
signal (determined by the POD Farm 2 Mixer View - Record Send settings), all through the physical
Main Outs 1-2. You can directly monitor other UX8 inputs by un-checking the Mute checkbox for
the corresponding input source in this tab. Note that the Mute and volume controls here only act
upon inputs (your guitar, bass, mic etc., plugged into the UX8), and not audio coming from your
computer (such as the playback of your DAW software session). UX8 provides monitoring of these dry
input signals through the hardware with zero latency, which is ideal for tracking with multiple sources
simultaneously.
Use the drop-down menu at the top to
select the output pair that you want to mix.
Each output pair can have different mix
settings.
Mix Controls
Inputs 1 - 12 offer the following controls:
Mute (On/Off) Monitor Volume (-100dB to +6dB)
Monitor Pan (100% Left - 100% Right)* Stereo Monitor Meters
* -3dB panning law is applied to the pan control to maintain a constant monitoring level across the
panorama.
Main Monitor Volume
This slider controls the overall monitoring volume for the current output pair. What you hear is
displayed in the adjacent level meter and includes the combination of input sources and computer-
generated signals, such as those assigned to the current output from within your DAW software. Note
that computer-generated signals (e.g. - the playback audio from your DAW software’s session) are
unaffected by the volume slider. The level meter’s clip LED graphics light up when the signal reaches
0 dB.