Owner's Manual

POD Farm 2 Advanced User Guide – Driver Panel & Recording

3•16

5d – Volume sliders (audio input):

These sliders 1 - 12 are not functional with UX8 - use the POD Farm Standalone Mixer sliders and/or

Tone volume instead of using these sliders to set your Record Send levels for Line 6 devices.

5e – Audio Output:

• The Format selectors show you the Sample Rate* and Bit Depth that the UX8 is operating at for

playback. The Bit Depth for all Line 6 devices is xed at 24 bit.

*It is recommended that you do not use the Sample Rate selectors in the Mac

Audio-MIDI

Setup dialog to set your sample rate when your recording software is running. Typically, your

recording software will offer a Sample Rate option within its own “Preferences” or “Audio

Setup” settings. It is best to conﬁgure the Sample Rate within the recording software, and you

will see the device’s sample rate switch automatically to match it.

5f – Volume sliders (audio output):

These sliders are not functional for Line 6 hardware - use the POD Farm 2 standalone volume controls

(or the Volume knobs on your Line 6 hardware) instead of these sliders to adjust output levels.

Line 6 Audio MIDI Settings Dialog - Inputs & Recording Tab

1 - Input Select Menu: This allows you to select which physical input “source” is fed through the

Line 6 USB hardware (Mic 1, Instrument, etc.) Note that this menu is ONLY selectable when the

POD Farm 2 standalone software is not in use by the Line 6 hardware. When POD Farm 2 is in use,

this selector remains grayed out, but displays the current Source that is selected within POD Farm 2

standalone application.