Owner's Manual

POD Farm 2 Advanced User Guide - POD Farm 2 Plug-In
4•13
Effects View
Effect Bypass Button Effect Model Menu
FX Time/FX Speed Controls
Effect Bypass Button - Bypasses the effect without removing it from the signal path
Effect Model Menu - Displays the current effect model. Click on the downward arrow next to the
name to select another model from within the current effect model category. Click on the up/down
arrow buttons at the left to navigate through the available models one at a time.
TIP: Effects can be moved within the Signal Flow View to be positioned either before or after
the Amp model, providing different sonic options. See the Signal Flow View section on page 4•32
for more info.
FX Time/FX Speed Controls - Within Modulation and Delay effects’ Effect View panels, you’ll
see this set of controls. These allow you to set the effect’s delay time/modulation speed parameter
independently of the current POD Farm 2 BPM setting. Or, you can use the Sync button to instead
have the effect follow the System Tempo settings (see the following section for info on System Tempo
& Host Sync).
Time/Speed/Note Value Knob Tempo Display
Note Value Display Sync On/Off Button
Sync On/Off Button - Click to toggle FX Tempo On/Off.
• When FX Time/FX Speed Sync is OFF, the effect’s time/speed parameter follows the time/
speed setting shown in this eld (displayed in milliseconds for delay effects, and Hertz for
modulation effects). The Sync button also determines the behavior of the Time/Speed knob.