Owner's Manual

Appendix B: FBV Foot Controllers
B•12
Looper Mode Footswitch Mappings
When POD HD is placed in Looper Mode, several FBV footswitches change their mappings
to perform the following Looper functions. Please also see “Looper Mode” on page 8•1.
FBV Longboard - Looper Mode Footswitch Mappings
Footswitch
Label
POD HD Looper
Function
Footswitch LED Description
REVERB
Undo Lit briefly, while
Undo action
occurs
Erases the most recent recorded
overdub
TREMOLO
Play Once Lit while playing
recorded loop
Plays the current recorded Loop
one time only
MODULATION
Looper Pre/Post Lit when Looper is
in Post position
Sets the position of the Looper
“Pre” or “Post” in the signal chain
CHANNEL A
Record/Overdub Lit when recording,
Flashes when
overdubbing
Immediately starts recording - Or, if
a loop is currently playing, overdubs
on top of the current loop
CHANNEL B
Play/Stop Lit when playing Toggles the recorded loop to play
and stop
CHANNEL C
Full/Half Speed Lit when half speed Toggles the loop playback and
recording between full and half
speed
CHANNEL D
Reverse/Forward Lit when selected Toggles loop playback and recording
between normal and reverse
Pedal Controllers
FBV Longboard devices include two “on-board” Pedals, PEDAL 1 and PEDAL 2. These
pedals are permanently mapped to the POD HD EXP 1 and EXP 2 assignable controllers,
respectively. Please see “Expression Pedal Assignment” on page B•16 for how to assign
these controllers to Amp & FX parameters to customize your Presets.
ItispossibletomanuallyassignthePEDAL1ToeSwitchtotoggleAmporFXBlocksOn/
Off - see “Using the EXP Pedal Toe Switch” on page B•20.