Owner's Manual

Appendix B: FBV Foot Controllers
B•17
The Controller Assign screen is then displayed specifically for the selected Model. In our
example, it is the Digital Delay W/Modulation. Use the Multi-function Knobs 1-4 to
configure the Pedal assignment options.
The Controller Assign screen
• Parameter (Knob 1): Select the parameter for the current Model that you want to
control.* For our example, we’ll choose the Mix parameter.
• Controller (Knob 2): Select the Pedal Mode that you want to assign to the parameter.
Choose Off to have no Pedal assignment, or choose EXP 1 or EXP 2. (Note that you
can alternatively choose TWEAK here to have the parameter assigned to your POD
HD TWEAK knob, instead of an FBV Pedal!)
• Min. Value (Knob 3): Set the desired parameter value for the Pedal’s “heel” position.
• Max. Value (Knob 4): Set the parameter value you’d like for the Pedal’s “toe” position.
* Note that when you add a Wah FX Model to your tone, the “Position” parameter for the
Wah is automatically assigned to EXP 1. Likewise, when adding a Volume or Pan FX Model,
its Position parameter is automatically assigned to EXP 2. This will result in multiple items
assigned to these EXP Pedals if you already have existing Pedal assignments. For all Factory
Presets that already include a Wah, Volume or Pan, these are typically already assigned as
well. Be sure to remove any unwanted Model’s EXP assignment for your Preset.