Owner's Manual

Features & Functionality

3•6

Tweak Knob Assignment

The TWEAK knob on your POD HD utilizes its own “Controller,” allowing it to be assigned

to control just about any Amp or FX parameter (or multiple parameters, simultaneously).

To conﬁgure the TWEAK Controller assignment, select the desired Amp or FX Block,

then double-press the MOVE button to display the Controller Assign screen. These

settings are all saved per Preset.

The Controller Assign screen

• Parameter (Knob 1): Select the parameter for the current Model that you want to

control.* In our example, we’ll choose the Mix parameter for our Delay.

• Controller (Knob 2): Select the TWEAK Controller.*

• Minimum Value (Knob 3): Set the parameter value you’d like for the TWEAK

knob’s minimum value.

• Maximum Value (Knob 4): Set the parameter value you’d like for the TWEAK

knob’s maximum value.

*The EXP 1 & EXP 2 Controller options are used to create assignments for use with Line

6 FBV™ Expression Pedals - see “Appendix B: FBV Foot Controllers” on page B•1.