Owner's Manual

Features & Functionality

3•7

FX & Amp Block FS Assignment

Any of the FX and Amp Blocks can also be conﬁgured with a “FS” (Footswitch)

assignment to remotely toggle the Block’s Model On/Off. This, of course, is of most use

with a connected FBV Controller device, so we’ve covered this information in “Amp &

FX Block Footswitch Assignment” on page B•18.

It is worth noting here that, when the Setup - FS MODE option (see “Page 1, Setup:Utilities

Options” on page 2•2) is set to “FS 5-8,” your POD HD A, B, C & D buttons will trigger

the FS 5-8 assigned Blocks. To create and edit FS assignments, select the desired FX or

Amp Block within the Signal Flow View, then hold the VIEW button. This displays the

FS ASSIGN screen. All assignments are saved per Preset.

The Footswitch Assign screen - use Knob 1 to create or edit a Block’s FS assignment