Owner's Manual

Set Lists & Presets
4•5
A, B, C & D Channel Buttons
To navigate through Banks & Presets, use the POD HD Bank Up or Bank Down
A, B, C, D buttons to navigate Banks and load a Preset.* (Note that you’ll need to have
the Setup - FS Mode option set to “ABCD” - see “Page 1, Setup:Utilities Options” on page
2•2.)
* If you have a Line 6 FBV™ Controller connected, you can use its footswitches to do the
same - see “Appendix B: FBV Foot Controllers” on page B•1.
• Press the Bank Up or Bank Down button and you’ll see the Queued Bank
screen displayed, with the current Bank/Channel flashing at the top:
The Queued Bank screen - the next Bank is queued
• Continue pressing the Bank Down or Bank Up button and you’ll see the previous/
next Bank’s A, B, C & D Channels & their Presets “queued,” as shown above. Then
press the A, B, C or D button to load the respective Preset from the queued Bank.
Saving Presets
To retain any customization you may have performed on your Preset, or if you want to
rename or move the current Preset, you can use the Save function. Whenever your current
Preset is in an “unsaved” state, you’ll see an asterisk appear in the Signal Flow View.
Asterisk indicating Preset is in an unsaved state