Owner's Manual

FX Edit Mode
5•1
FX edit mOde
Within this chapter, we’ll cover the Edit Mode for FX, which provides access to all editable
parameters for the FX models. (For info on Amp Models, see “Editing Amp Parameters”
on page 6•6.) All changes made in the Edit Mode are saved per Preset.
Accessing FX Edit Mode
First press the VIEW button to display the Signal Flow View screen.
SAVE
HOLD FOR SYSTEM & I/O
VIEW
P
R
E
S
E
T
S
The Signal Flow View - Modulation FX Block selected
Use the Nav. Pad buttons to select the Block you wish to edit. In our example above,
we’ve selected the first Block, which currently has a Modulation Model loaded. While in
the Signal Flow View, you can edit a few options for the selected Block’s FX Model using
the Multi-select Knobs 1 - 4. However, by entering the Edit Mode screen, you’ll have
instant access to all parameters. Double-press the ENTER button to display Edit Mode.
ENTER
DBL PRESS TO ASSIGN CTL
MOVE
AMP & FX ON / OFF
The FX Edit Mode - Modulation:U-Vibe FX Model loaded