Owner's Manual

Amp, Cab & Mic Models
6•8
Page 1 of the Amp:Edit Screen - Amp A Bypassed
• With an Amp Model Off: You’ll see only a VOL knob, as shown above for Amp A.
This is a separate parameter strictly for the Amp Model’s Bypass Volume. Use the
VOLUME knob on your device to adjust this, and its value is stored separately with
the Preset for whenever the Amp Block is Bypassed.
Note that the VOLUME knob does not control the level at all for a “Null” Amp Block.
• UsetheMulti-Functionknobs1-4toadjusttheoptionsatthebottomofthescreen:
• Knob 1: Select the desired Amp or Preamp Model.
• Knob 2:SelectthedesiredCabModel(alsoseethePage4options).
• Knob 3:SelectthedesiredMicModel(alsoseethePage4options).
• Knob 4: Choose between adjusting controls for Amp A or Amp B. (This option
is available on all AMP EDIT screens.)