Owner's Manual

Using the Looper
8•1
lOOper mOde
The Looper in POD® HD offers you up to 48 seconds of mono recording time (in Half-
Speed Mode) or 24 seconds recording time (in Normal Mode), as well as the ability to
undo, record overdubs, playback Loops at half speed, in reverse, and more! Most Looper
functions are accessible from the buttons on your POD HD device. Or, connect a Line 6
FBV™ Foot Controller for full, hands-free Looping!
Footswitch assignments for the Looper vary among the supported Line 6 FBV Controller
models - please see “Appendix B: FBV Foot Controllers” on page B•1 for the full info.
Looper Controls & Performance View
Hold the POD HD Bank Down button to toggle the Looper Mode On/Off - The button
remains lit when Looper Mode is active. When in Looper Mode, the Bank Up and A, B, C
& D buttons then provide access to the Looper functions, as indicated by the gold-colored
labels below each button.
Looper Mode functions for POD HD buttons
Additionally, the Looper screen of the Performance View displays the behavior of all
Looper functions.* You can think of these as “this is what will happen when the respective
button is pressed” indicators. Press the VIEW button to show this screen whenever you
use the Looper. (Also see the Looper - Performance View options , “Page 1, Setup:Utilities
Options” on page 2•2.)
The Performance View, Looper screen