Owner's Manual

Overview

1•4

Tuner Mode

To enter Tuner mode, press and hold the TA P button. A few options are available, adjusted

using the Multi-function knobs.

The Tuner screen

Note that the Tuner receives a signal only from the POD HD Input 1 source.

Pluck an individual string on your guitar and you’ll see the name of the note displayed.

When the graphic bar is to the left of center, your string is ﬂat; when it is to the right, your

string is sharp. When the bar is within the center range, triangles will appear above and

below it, indicating your string is in tune.

• Reference (Knob 1): If you’d like to tune to a reference other than standard 440Hz,

select from 425 to 455Hz.

• Audio (Knob 2): Select Mute to silence POD HD output while tuning, or select

Bypass to hear your guitar dry.

Press the TAP switch, or any other button, to exit Tuner Mode.