Owner's Manual

USB Audio
9•12
Inputs & Recording Page
9
10 11
The Line 6 Audio MIDI Devices - Inputs & Recording tab
9
Record Sends List: Displayed here are the Record Sends for the current Line 6 device
that will be available to your audio software. For POD HD you’ll see the one, stereo “1-2
Main Out” Record Send.
10
Hardware Monitor Level: This slider independently controls the volume of your
processed Source Input tone output for monitoring (the signal fed to the device’s main
outputs). It does not affect the level of the signal fed to your computer via the Record
Send. This allows you to balance your guitar’s monitor level against the playback audio
from your computer, such as when recording in DAW software.
Your DAW software may also offer its own “software monitoring” function. You may want
to use the DAW’s software monitoring in some scenarios, such as if you want to hear your
guitar signal processed with plug-ins on the DAW track. When utilizing DAW software
monitoring, you’ll want to set this Hardware Monitor slider to minimum to allow you to
hear only the DAW software monitoring signal.
11
Record Send Level: This slider independently controls the level of the POD signal
fed to your computer via the Record Send. This directly affects the signal level that is
recorded into your DAW tracks. Note that you can also check the +18dB checkbox here
if you need to boost the signal fed to your DAW.