Owner's Manual

Appendix A : Line 6 Monkey
A•2
FBV MkII Users: If you are using a Line 6 FBV MkII Controller then it is recommended
to install any available updates for it as well. Just connect your FBV MkII directly to your
computer’s USB port and use Line 6 Monkey as described above.
Grab Those Updates
If you see any items where a newer version is available, then you should click on that item
and let the little Monkey fellow walk you through the installation steps.
Line 6 Monkey - Update screen for POD HD
As an example, the above screenshot shows Monkey has detected that a newer Firmware -
Flash Memory version is available than is currently installed in our device. In this scenario
you can select the Flash Memory item and click Update Selection. Be sure to read the
prompts carefully and Monkey will assist you in performing the update in minutes. It is
especially important not to disturb the devices’ controls and cable connections until the
update fully completes!