Owner's Manual

Overview
1•5
Tap Tempo
Tap Tempo is the term we use to refer to the “System Tempo” value that is
accessed via the TA P button on your POD HD device. Tap rhythmically to set
your Tempo. Alternatively, you can set a numerical Tempo value within Setup
(see “Page 6, Tempo Options” on page 2•10). This setting is saved per Preset.
You’ll see the TA P switch blink to indicate your current Tap Tempo BPM (if your Tap LED
option is set to “On” - see “Page 2, Setup:Utilities Options” on page 2•3). Tempo-based
FX (Modulation, Filter & Delay FX) that offer a Tempo Sync parameter can optionally be
set to a note division of this Tap Tempo value.
Connections
Please refer to your POD HD Pilot’s Guide for descriptions of the Input & Output
connections. You’ll find more details on their specific uses within the following chapters
as well!