® POD HD ® Pilot’s Handbook Manuel de pilotage Pilotenhandbuch Pilotenhandboek Manual del Piloto 取扱説明書 Go to www.line6.com/manuals and download the Advanced User Guide 40-00-0295 Advanced Users Guide available @ www.line6.
Important Safety Instructions C AU T IO N RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT REMOVE SCREWS. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THE APPLIANCE TO RAIN OR MOISTURE. CAUTION: This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of FCC Rules.
You should read these Important Safety Instructions. Keep these instructions in a safe place • • • • • • • • • • • • • • Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Welcome To POD HD Thank you for inviting POD HD home with you! Our engineers have worked long and hard to bring you the new POD HD series of multi-effects processors. Featuring brand new HD Amp modeling, POD HD also features effects taken from our industry standard M series of products M5, M9 & M13. When you’re ready to get deeper, we recommend you get the Advanced Guide & Model Gallery for POD HD by visiting us online at www.line6.com/manuals.
1. Display - The LCD is your window into the power of the POD HD. Home Pages - are the default view on your POD. There are 3 userselectable views for the Home Page. Preset channels within the current Bank via the Setup Pages (Press and Hold the VIEW button to access System Pages). Selected Sélection Ausgewählte Geselecteerd Seleccionados Press the VIEW button once more to show the Big User View, which shows you the bank and channel number of the current preset.
again to complete the save operation. Press any other button to cancel. parameter. Please refer to the Advanced Guide for more detail. 4. View Button - Press this button to switch from any of the 3 user selectable Home Page views – Signal Flow View, Big User View, or Performance View. Press and hold the VIEW button to access the System & I/O edit pages where you can assign the Display contrast, configure inputs/ 9. Drive - Drive is like the gain knob on most amps; controlling how 5.
control clockwise towards maximum before any audio clipping (the bad kind of distortion) occurs. 13. Tweak Knob - Controls amp or FX parameters assigned to TWEAK. See Controlling Amp & FX Parameters section of this manual for details on assigning parameters to your POD HD's TWEAK KNOB. Note: Be sure to set [CONTROLLER] to [EXP 1]. 14. Preset / Looper Buttons - In standard operation (L-R) your buttons work as follows: Bank Down , Up - These choose amongst 16 banks of presets in your current Set List.
Editing Amp, Cab & Mic Parameters and adjust level. 22. Mic Input - Plug in your microphone here and use the mic level control to get a nice, healthy level. Visit the System & I/O edit pages for routing options. 23. Power - Flip this to bring your POD HD to life. When an Amp Block is selected, you can use the Multi-function knobs 1 - 4 to select Amp, Cabinet, or Mic Models. When using a dual amp setup, Knob 4 allows you to assign which amp gets controlled by the DRIVE, VOLUME, and TONE knobs.
"squishy" with more touch sensitivity and improved sustain. Knob 3 Controls how much heater hum and AC ripple interacts with your tone. At maximum setting things get really freaky - you've been warned. Knob 4 - Sets the Multi-Function knobs to alter the settings on this page for Amp A or Amp B. to alter the settings on this page for Amp A or Amp B. NOTE: When scrolling through the Amp Models, you’ll see that we’ve also Press the 4 Way Nav Pad right arrow button again to view page 3.
4 Way Nav Pad to move the FX Block to the desired position. Once the FX Block is in the desired Position, press the MOVE button again to drop it into place. Mixer Block The Mixer is permanently positioned at the end of the parallel Paths A & B and provides individual Level and Pan controls for each Paths’ output before fed to the “Post” position.
the FBV Shortboard MKII for optimal performance. Your footswitch assignments control the footswitches as shown below. Note: FBV's A, B, C, & D switches can be reassigned to FS5-FS8 for additional On/Off FX or Amp block control (see System Setup). Looper ON/OFF A / FS5 FS2 FS3 B / FS6 C / FS7 D / FS8 Rename a Set List: With the desired Set List selected, press the SAVE button to display the Rename Set List screen.
desired Bank. Page 1, Setup:Utilities Options Saving Presets: To retain any new changes made to a Preset, or if you want to rename or move the current Preset to a different Set List and/or new Channel location, you can use the Save function. To initiate the Save function, press the SAVE button to display the Save Preset screen. The top portion of the screen lists the Flash Memory and USB Firmware versions currently installed on your POD HD device.
option “Off” the decay is muted instantly when toggling the Model off. Note that the Trails feature does not provide a “spillover” of the FX decay when changing Presets. The Trails setting is saved per Preset. Page 3, Setup: Input Options Page 2, Setup:Utilities Options The adjustable options at the bottom of the screen are as follows - all are global settings. Knob 1 - Adjusts the contrast of the POD HD LCD screen.
Page 5, Setup: S/PDIF Output Options Page 6, Tempo Options These options are strictly for configuring the signal fed to the S/PDIF OUT. Use this 24-bit digital connection when connecting to the S/PDIF input of other devices, such as a computer audio interface or digital mixing console. When using S/PDIF, be sure you've synchronized the external device's digital input to the POD HD's S/PDIF digital output.
Display Icon Reference HD Amp Model Block Dynamic Effect Block Distortion Effect Block Wah Effect Block EQ Effect Block Modulation Effect Block Delay Effect Block Reverb Effect Block Filter Effect Block Pitch Effect Block 48 Second Looper Multi Effect (Foot switch On/Off assigned to more than one effect)