Owner's Manual
Appendix B: FBV Foot Controllers
B•2
Getting Connected
All FBV devices come with an “RJ-45” cable. Note that this cable is
indeed a standard “Category 5” computer network cable. So, in
case you lost yours, simply run down to any electronics or computer
store and ask for a cable of this type.
With POD HD Pro X powered O, connect this cable between the FBV device’s TO
AMP jack and the POD HD Pro X FBV jack. If you have an optional Expression Pedal,
connect it to the EXP. PEDAL jack on your FBV now. Then Power On POD HD Pro X -
You’ll see your FBV light up, and you’re ready for action!
NOTE: If you have not done so already, it is recommended that you calibrate the Pedal for your
FBV device. Please see the Pilot’s Handbook that came with your FBV device, or you can
download it, or the FBV Advanced Guide, from http://line6.com/support/manuals/.
Setup Options for FBV
There are several Setup options that aect POD HD Pro X behaviors when an FBV
device is connected. Hold the VIEW button to enter Setup to access the following
options. (Also see “Accessing System Setup” on page 2•1 for info on other Setup
options.)
Setup Page 1
• Footswitch Mode (Knob 1): Congures the function of your FBV A, B, C & D
footswitches. This setting is global. See “FX & Amp Block FBV Footswitch
Assignment” on page 3•6 for info on how to congure these assignments per
Preset.