Owner's Manual

Appendix B: FBV Foot Controllers
B•7
FBV Shortboard MkII - Footswitch & Pedal Mappings
Footswitch
Label
POD HD Pro X
Function
FBV LCD Screen Footswitch
LED
Description
Pedal Toe
Switch
EXP 1/EXP 2
Pedal Mode
(When no
Pedal 2 is
connected)
No change EXP 1 =
WAH lit
EXP 2 =
VOL lit
Toggles to the
on-board Pedal
between EXP 1
and EXP 2 modes
Toe Switch No change No change Assignable as
a footswitch
Looper Mode Footswitch Mappings
When POD HD Pro X is placed in Looper Mode, several FBV footswitches change their
mappings to perform the following Looper functions. Please also see “Looper Mode”
on page 8•1.
FBV Shortboard MkII - Looper Mode Footswitch Mappings
Footswitch
Label
POD HD Pro X
Looper Function
Footswitch LED Description
FUNCTION 1
Looper Mode
On/O
Lit when
mode active
Toggles Looper Mode On/O
STOMP
Undo Lit briey,
while Undo
action occurs
Erases the most recent
recorded overdub
MODULATION
Play Once Lit while playing
recorded loop
Plays the current recorded
Loop one time only
DELAY
Looper Pre/Post Lit when Looper
is in Post position
Sets the position of the Looper
“Pre” or “Post” in the signal chain
A
Record/Overdub Lit when
recording,
Flashes when
overdubbing
Immediately starts recording
- Or, if a loop is currently
playing, overdubs on top
of the current loop