Owner's Manual

Appendix B: FBV Foot Controllers
B•8
FBV Shortboard MkII - Looper Mode Footswitch Mappings
Footswitch
Label
POD HD Pro X
Looper Function
Footswitch LED Description
B
Play/Stop Lit when playing Toggles the recorded
loop to play and stop
C
Full/Half Speed Lit when half
speed
Toggles the loop playback
and recording between
full and half speed
D
Reverse/Forward Lit when selected Toggles loop playback
and recording between
normal and reverse
Pedal Controllers
FBV Shortboard MkII devices include an “on-board” Expression Pedal, as well as an
optional jack to include a 2nd Expression Pedal. These pedals access the POD HD Pro
X EXP 1 and EXP 2 assignable controllers. Please see “Expression Pedal & Variax® Knob
Controller Assignment” on page B•18 for how to assign these controllers to Amp & FX
parameters to customize your Presets.
When no additional Pedal is connected to the FBV EXP. PEDAL input, the on-board
Pedal‘s “Toe Switch” will toggle between the control of EXP 1 and EXP 2. The red WAH
and green VOL LEDs on FBV illuminate to indicate the current Pedal Mode, respectively.
(It is also possible to manually assign other functions to the Toe Switch - see “Using the
EXP Pedal Toe Switch” on page B•23.)
EXP 1 and EXP 2 with Pedal 2 Connected
When a 2nd Expression Pedal (such as a Line 6 EX-1 Expression Pedal) is connected,
the on-board Pedal remains mapped to only EXP 1, and Pedal 2 to only EXP 2. Whenever
a Pedal 2 is connected, you’ll see the EXP 1 & EXP 2 LEDs both lit.
FBV Express MkII