Owner's Manual

Appendix B: FBV Foot Controllers
B•10
FBV Express MkII - Footswitch & Pedal Mappings
Footswitch
Label
POD HD Pro X
Function
7-Segment LED
Display
Footswitch
LED
Description
Currently Lit
A, B, C or D
Tuner On/O Displays current
note and at or
sharp status
Remains lit Press and hold
the currently lit
footswitch to
toggle the Tuner
Mode On/O
Sets system
Tap Tempo
Dot ashes at
Tempo rate
Remains lit “Tap” the currently
lit footswitch to
enter the device’s
Tap Tempo
Pedal Toe
Switch
EXP 1/EXP 2
Pedal Mode
No change EXP 1 =
WAH lit
EXP 2 =
VOL lit
Toggles the Pedal
between EXP 1
and EXP 2 modes
Toe Switch No change No change Assignable
footswitch
Note: Access to the POD HD Pro X Looper Mode is not supported by the Line 6 FBV Shortboard
MkII device.
Pedal Controllers
FBV Express MkII devices include an “on-board” Pedal which provides access to both
the POD HD Pro X EXP 1 and EXP 2 assignable controllers. Please see “Expression
Pedal & Variax® Knob Controller Assignment” on page B•18 for how to assign these
controllers to Amp & FX parameters to customize your Presets.
The Pedal‘s “Toe Switch” will toggle between the control of EXP 1 and EXP 2. The red WAH
and green VOL LEDs on FBV illuminate to indicate the current Pedal Mode, respectively.
(It is also possible to manually assign other functions to the Toe Switch - see “Using the
EXP Pedal Toe Switch” on page B•23.)