Owner's Manual

Appendix B: FBV Foot Controllers
B•20
The Controller Assign screen
• Parameter (Knob 1): Select the parameter for the current Model that you want to
control.* For our example, we’ll choose the Mix parameter.
• Controller (Knob 2): Select the controller that you want to assign to the parameter.
Choose O to have no assignment, or choose EXP 1, EXP 2, Variax Vol or Variax
Tone.
• Min. Value (Knob 3): Set the desired parameter value for the Pedal’s “heel”
position.
• Max. Value (Knob 4): Set the parameter value you’d like for the Pedal’s “toe”
position.
* Note that when you add a Wah FX Model to your tone, the “Position” parameter for the Wah is
automatically assigned to EXP 1. Likewise, when adding a Volume or Pan FX Model, its Position
parameter is automatically assigned to EXP 2. This will result in multiple items assigned to these
EXP Pedals if you already have existing Pedal assignments. For all Factory Presets that already
include a Wah, Volume or Pan, these are typically already assigned as well. Be sure to remove
any unwanted Model’s EXP assignment for your Preset.
To create a controller assignment to an FX Loop parameter, simply select the FX Loop
Block within the Signal Flow View and go to the Controller Assign screen, as described
above.