Owner's Manual

Appendix B: FBV Foot Controllers
B•22
The Footswitch Assign screen, with a Delay FX Model selected
Use Multi-function Knob 1 to select the footswitch to which you want this FX Block
assigned - choose FS1 through FS8, the EXP Toe Switch, or None to remove the
Block’s assignment. The following behaviors apply:
• If a footswitch already has an Amp or FX Block assigned: The existing Block
remains assigned, and selecting this footswitch additionally assigns your new
Block. When referencing the Performance View, you’ll see the footswitch display
a “Multi” graphic to indicate this. You can congure 2 or more parameters to the
same footswitch to toggle them On/O simultaneously - or, have one toggle On
while another Toggles O!
Indicates multiple Blocks assigned to a footswitch
TIP: To reference current footswitch assignments, when in the Footswitch Assign screen, use
the Nav. Pad buttons to select each Block, and look at the Knob 1 setting for each at the
bottom of the screen.
• When a footswitch has no Block assigned: You’ll see the N/A graphic displayed
in the Performance View for the respective footswitch.