Owner's Manual

Appendix B: FBV Foot Controllers

B•25

• Press the BANK UP and BANK DOWN footswitches to select the desired Set List.

Note that your FBV LCD screen displays the name of the selected Set List.

• Press FUNCTION 2 / AMP 1 once again to load the selected Set List. You’ll see that

the same numbered Preset from the previous Set List is automatically loaded

from the new Set List.

Tap Tempo

ENTER

DBL PRESS TO ASSIGN CTL

MOVE

AMP & FX ON / OFF

SAVE

HOLD FOR SYSTEM & I/O

VIEW

For all FBV devices, you can stomp rhythmically on the TAP footswitch to set

your Tap Tempo. Alternatively, you can set a numerical Tempo value within

Setup (see “Page 6, MIDI/Tempo Options” on page 2•10).

You’ll see the LED on the TAP switch blink to indicate your current Tap Tempo BPM.

Tempo-based FX (Modulation, Filter & Delay FX) that oer a Tempo Sync parameter

can optionally be set to a note division of this Tap Tempo value.

Tuner Mode

For all FBV devices, to enter Tuner mode, press and hold the TAP button. See “Tuner

Mode” on page 1•4 for details.