Owner's Manual
System Setup
2•3
• Trails (Knob 4): When set to “On,” allows the echo repeats and/or decay of Delay
and Reverb FX to continue when the Model is toggled O. With the Trails option
“O” the decay is muted instantly when toggling the Model O. This setting is
saved per Preset. (Note that this feature does not provide a “spillover” of the FX
decay when changing Presets.)
Page 2, Setup:Utilities Options
The options at the bottom of the screen are as follows - all are global settings.
• LCD Contrast (Knob 1): Adjusts the screen’s contrast.
• Tap Tempo LED (Knob 2): Choose “On” to have the LED light for the TAP button
(or connected FBV TAP footswitch) ash to indicate the current Tap Tempo value.
Choose “O” to have it remain unlit.
• AC Frequency (Knob 3): All HD Amp Models include simulation of AC hum,
typical of the AC Vacuum Tube Heater component - an important part of the
tonality of a tube amplier. Set the AC Rate to match that of the USA (60Hz) or UK
(50Hz) frequency for authenticity. (This setting may be subtle depending on the
current Amp Model settings, and may be more apparent when synchronizing this
setting with the AC rate of any tube amplier that POD HD Pro X may be plugged
into.)
• FBV Express (Knob 4): This option applies only to a connected Line 6 FBV
Controller. It should only be set to “On” specically for a FBV Express MkII model
device. Please see “Setup Options for FBV” on page B•2.