Owner's Manual
Appendix C: MIDI
C•3
POD HD Pro X - MIDI Control Reference
MIDI CC # Value Function
063 64-127 = Undo Looper Undo Switch
065 0-63 = Forward 64-127 = Reverse Looper Forward/Reverse Switch
067 0-63 = Pre 64-127 = Post Looper Pre/Post Position Switch
068 0-63 = Full 64-127 = Half Looper Full/Half Speed Switch
099 0-63 = O 64-127 = On Looper Mode On/O
Additional Controls
064 64-127 = Tap Tap Tempo - Enter Tap Tempo
069 0-63 = O 64-127 = On Tuner Mode On/O
Bank & Program Change Messages
POD HD Pro X will respond to incoming MIDI Bank & Program Change messages as
follows.
• Load Set List: from your MIDI controller device, send a Bank Change CC0
(Bank MSB), CC32 (LSB) message with a value of 0 (for Setlist 1), 1 (for Setlist
2), etc., followed by a Program Change message (Value 0-63 for Preset 01A
- 16D) for the desired Preset within the Set List. The Set List and Preset are
loaded on POD HD Pro X.
• Load a Preset within the current Set List: Send a Program Change
message (Value 0-63 for Preset 01A - 16D) for the desired Preset within the
current Set List.
When using the POD HD Pro X hardware options for navigating Presets (the PRESETS
knob, 4-Way Nav. Disc, and FBV footswitches A, B, C, D*) the device will automatically
transmit MIDI a Program Change message corresponding to the selected Preset.
These messages are transmitted to the MIDI OUT/THRU DIN. It is also possible to
congure Footswitches to send Bank and Program Change messages - see the next
section.