Owner's Manual

Appendix C: MIDI
C•5
• Press PRESETS Knob > Press Nav. Disc Arrow Button > Press Enter
Button: Internally, this sequence calls up the Set Lists screen, selects a Set
List (1 - 8) and loads the Set List. This sequence also transmits a MIDI Bank
Change - Fixed message, with a Value of 0 through 7, respectively, when
selecting Set List 1 - 8.
Using POD HD Pro X/FBV as a MIDI Controller
Note: Please refer to “FBV Controller Devices - Footswitch & Pedal Mapping” on page
B•4
the see how your specic FBV device’s switches & pedals are mapped to the various
POD HD Pro X assignable controllers (FS 1-8, EXP 1, EXP 2, TOE SWITCH, etc.)
You can congure any number of your POD HD Pro X Presets to include customized
MIDI Control assignments for most FBV footswitches and Pedal controls. This allows
you to use POD HD Pro X and FBV to remotely control other hardware or software,
such as Line 6 M13, M9, POD® Farm 2 Plug-In, another POD HD Pro X or HD500
device, or any other Line 6 or 3rd party products that respond to external MIDI control!
Note: Footswitches FS5 - FS8 will only transmit your congured MIDI assignments when their
Setup option is set to the FS5 - FS8 “Pedalboard Mode” - see ““Page 1, Setup:Utilities
Options” on page 2•2
. Also, when POD HD Pro X is actively in Looper Mode, xed MIDI
CCs are transmitted from some footswitches - see “Looper Mode Footswitch Behaviors”
on page C•8
.