Owner's Manual
Appendix C: MIDI
C•6
The MIDI ASSIGN Screen
The MIDI ASSIGN screen is where you congure custom MIDI commands. To access
the MIDI ASSIGN screen, start on the Home View page and press and hold the MOVE
button. All settings in this screen are saved per Preset.
ENTER
DBL PRESS TO ASSIGN CTL
MOVE
AMP & FX ON / OFF
Press and hold the MOVE button to display the MIDI ASSIGN screen
Use the and Nav. Disc buttons to select the desired FBV footswitch or Exp
Pedal control. The selected control is indicated by the down arrow (such as FS2 in
the above screen). Once selected, the control’s MIDI options can be edited using the
Multi-function Knobs 1-4. Each respective control in the screen indicates if it has an
active MIDI assignment:
FS1 with MIDI Assignment FS1 with no MIDI Assignment
• MIDI Channel (Knob 1): Select the MIDI Channel on which the selected
control will transmit its MIDI command.
• None: Send no MIDI data. (Note that you won’t see Knob 2 - 4 options appear
until you select an option other than “None.”)
• 01 - 16: Choose the MIDI Channel on which to transmit the selected control’s
messages.
• Base: Sets the control to follow the current “system” MIDI Channel, as set in
the device Setup (see “Page 6, MIDI/Tempo Options” on page 2•10). This is a
handy feature to have any Presets’ MIDI Controls set to “Base” to dynamically
follow the common Setup -MIDI Channel value.