Owner's Manual

System Setup
2•5
• Or, you can manually select from a variety of impedance values from low to
high (22k, 32k, 70k, 90k, 136k, 230k, 1M, or 3.5M). A lower value will typically
result in some high frequency attenuation, lower gain and overall “softer” feel. A
higher value provides full frequency response, higher gain and overall “tighter”
feel.
• Inputs Setup - Determines whether the other 3 options in this Inputs screen are
applied per Preset, or globally.
• Preset - Recalling a preset will load the Input 1 Source, Input 2 Source and
Guitar In-Z parameter settings as last saved with the individual preset.
• Global - Once the “Global” option is selected here, the other three Input
options’ values on this Setup page (Input Sources 1 and 2, and Guitar In-Z) are
utilized globally, regardless of their values that are saved with each individual
preset. The Input values you choose on this Setup page are then retained
independently for the Inputs Setup - Global option. When you change the
Inputs Setup back to “Preset,” the Input options’ values saved with each
individual preset are once again utilized.
Note: Saving a preset while this option is set to “Global” will write the current global Inputs and
Guitar In-Z values to the individual, saved preset.
Amp & FX Model - Guitar Input Impedance Ratings
Model Guitar Input Impedance (Ohms)
Amps & Preamps
All Amp & Preamp Models 1M
Distortion FX
Screamer 230k
Color Drive 136k
Buzz Saw 230k
Facial Fuzz 22k
Jumbo Fuzz 90k
Fuzz Pi 22k
Octave Fuzz 230k
All Other Distortion Models 1M