Owner's Manual
System Setup
2•8
Page 4, Setup: Output Options
The Mode setting on this page allows you to congure the type of signal fed to your
POD HD Pro X outputs to optimize for direct recording versus connecting to an external
amplier.
Note that this Mode setting affects the signal fed to the POD HD Pro X Left & Right Balanced,
Unbalanced, Digital & Headphone outputs, as well as the signal fed to the USB Record Send &
L6 LINK™ output.
Knob 1 selects the Output Mode. This is a global setting.
• Studio/Direct: Typically the best option when connecting “Direct” to a mixing
console or recording device. This signal includes “Studio” Cab Models, Mic
Model and an “AIR” convolution to best emulate a mic’ed amp within a room.
• Combo and Stack settings: Optimizes your tone for connecting to an external
amplier. The signal includes “Live” Cab Models,with no Mic Model or “AIR”
convolution, with a special EQ curve added for each.
• Combo Front & Stack Front: For connecting into the front input of a typical
combo amp or amp head + external cab, respectively. When choosing either
of these Modes, you’ll see these additional options for further tone shaping: