Owner's Manual
System Setup
2•9
• Lows (Knob 2): Attenuates the low frequencies.
• Focus (Knob 3): Increases the overall midrange.
• Highs (Knob 4): Attenuates the high frequencies.
• Combo Power Amp & Stack Power Amp: For connecting to the power amp of
a combo or head amp.
TIP: When using the Combo or Stack options and connecting into a tube amplier, we also
recommend that you choose a Preamp Model from the Amp Model menu (rather than one of
the “Full” Amp Models). HD Preamp Models include no power amp emulation, making them
typically better suited for this connection. That said, there is no wrong choice! PODs have always
been about exibility... Check out all the possibilities and decide which Models work best for
your tone!
Page 5, Setup: Digital Output Options
These options are strictly for conguring the signal fed to the 24-bit digital outputs (S/
PDIF or AES/EBU). All settings are global. When connecting to another digital device, it is
best to clock the external device to follow POD HD Pro X (with POD HD Pro X as the
“master” device) to maintain proper synchronization - please see your digital device’s
documentation for its digital clock features.
Note: The AES/EBU - L6 LINK output is an XLR jack that can be used for either type of connection
(also see “Page 9, Setup: L6 LINK Audio” on page 2•17). The AES/EBU options in this
screen apply only the AES/EBU output and do not affect the L6 LINK audio signal when
connected to a Line 6 DT Series amplier.