Owner's Manual
Features & Functionality
3•1
FeatureS & FunctiOnality
Ready to dive deeper? In this chapter, we’ll go into more detail on the major features &
functionality oered on POD® HD Pro X.
FX Blocks
For each Preset there is always a total of 8 FX Blocks, each capable of loading any FX
Model, (or the FX Loop - see next section). When in the Signal Flow View screen, select
any FX Block and you’ll see options at the bottom of the screen, adjustable using the
Multi-Function Knobs 1-4.
The Signal Flow View with an FX Block selected
• Model Type (Knob 1): Select from among the FX Model categories.
• To load no eect in the selected Block, choose “None.” You’ll see the Block
then appear “Null,” as shown below. A Null FX Block can still be moved and
loaded with a new Model at any time. Setting unneeded FX Blocks to None
is a great way to minimize your tone’s DSP usage (see “Dynamic DSP” on
page 3•7).
FX Blocks with the Model set to “None”
• FX Model (Knob 2): Choose the desired Model from the Model Type list.
• FX Parameters (Knob 3): Choose from up to 5 adjustable parameters.
Alternatively, double-press the ENTER button to access all the Model’s parameters
in one screen - see “FX Edit Mode” on page 5•1.