Owner's Manual

Set Lists & Presets
4•3
Arranging Presets within Set Lists
While in the Set Lists screen, double-press the ENTER button to display the list of
Presets in the current Set List, where you can reference each Preset’s Bank/Channel
location, load a Preset, or rearrange the Presets into in any order you like.
The Set List - Presets screen
Load a Preset: Use the Nav. Pad buttons, or turn the PRESETS knob to select
any of the 64 locations, or use the Nav. Pad buttons to navigate through
the list one Bank at a time. Press the ENTER button to immediately load the
selected location’s Preset.
Move a Preset: Here is an example where we’ll move the “HIWAY 100” Preset
from location 2A to location 2C.
• Select location 2A for the “HIWAY 100” Preset, then press the MOVE button.
You’ll see the selected Preset appear “raised” to indicate it is now moveable:
ENTER
DBL PRESS TO ASSIGN CTL
MOVE
AMP & FX ON / OFF