Owner's Manual

Set Lists & Presets
4•4
• Use the Nav. Pad buttons or PRESETS knob to select the 2C destination location.
Note that as you select a new Bank/Channel location, the resulting Preset order
is displayed on the screen. For our example, “HIWAY 100” is inserted into 2C,
resulting in the Presets from the original location (2A) to the destination (2C) to
move up one slot:
“Hiway 100” moved from 2A to 2C
• Once you’ve placed the Preset over the desired channel location, press the
MOVE button again to “drop” it into the slot.
• Repeat the above steps to rearrange any additional Presets as desired. To
commit all your changes, you must next press the PRESETS button - you’ll see
the “Saving” screen displayed to indicate this process.
The Set List Saving screen