Manualshelf

Owner's Manual

ManualsBrandsLine 6 ManualsAudioLine 6 POD HD Pro X
41424344454647484950
FX Edit Mode
5•4
FX Loop
The FX Loop can be inserted into any one FX Block.
The FX Loop Edit Mode screen
Adjust the Parameter & Value settings the same as with any FX Model. These FX Loop
Edit Mode settings are saved per Preset.
• Send: Reduces the level fed out the FX Loop SEND output(s) to your external
devices.
Note: Use the LINE-STOMP switch on the back of POD® HD Pro X to choose between levels
for Rack FX versus Pedals. This Send parameter can then be used to further ne-tune the level
fed to your connected devices.
• Return: Adjusts the level of the signal received into the FX Loop RETURN
input(s).
• Mix: Blends the FX Loop signal that with the POD HD Pro X tone signal.
When set to 100%, the full POD HD Pro X signal is fed to the FX Loop
SEND outputs. When set to 0%, your input signal bypasses the FX Loop
completely, so that you’ll hear only your POD HD-processed signal. Be sure
to set the Mix to less than 100%, or toggle the FX Loop Block “O,” if
you do not have a complete connection between the device’s SEND &
RETURN jacks, or you’ll hear only silence from the output of POD HD Pro
X!