Owner's Manual
Amp, Cab & Mic Models
6•4
• Knob 3 - Selects the Mic Model.
• Knob 4 - When the current Preset includes two Amp models, this selects
which Amp (the Amp within Path A or B) is controlled by the Amp Tone
knobs.
As you change the Amp Model (Knob 1), you’ll also see that default Cab and Mic
models are automatically selected for each Amp or Preamp (see “About Default Amp
Settings” on page 6•5). But you can use Knobs 3 & 4 to select any Cab and/or Mic
you like. These settings are saved per Preset.
Attention Bass Players: Try the Flip Top Bass Amp Model for some thump! Note that this Model
loads with a matching 1x15 Flip Top speaker cab, as well as a full set of Mic Model options for
stellar bass tones. (And yes, you can indeed select any other Cab with the Flip Top Bass Amp
Model, or choose the Flip Top Cab with any Guitar Amp Model!) See the following sections for
details about these models.
Amp and Preamp Models
We’ve included a complete set of “Preamp” versions of each Amp as well. Choose
one of these to obtain the tone of just the preamp stage of the amp - recommended
when feeding your POD HD Pro X output into an external amplier, or when using the
L6 LINK™ connection.*
A Preamp Model is selected for Amp B
*Note that, whether an Amp or Preamp is selected, the additional application of Cab and Mic
Models is dependent upon the SETUP:OUTPUT settings. Please see “Page 4, Setup: Output
Options” on page 2•8
.
The overall volume levels among the dierent Preamp Models varies - this is normal.
The Preamp sections of each of the classic ampliers we modeled are indeed quite
dierent, and we’ve set the Preamps’ default values to best match the type of power
amp into which they are intended to feed. Tweak the DRIVE and VOLUME knobs to
optimize the level for your specic needs!