Owner's Manual

Amp, Cab & Mic Models
6•6
Mic Model Descriptions
Mic Name Based On...*
121 Rbn Royer® 121 Ribbon
67 Cond Neumann® U67 Condenser
87 Cond Neumann® U87 Condenser
Bass Cab Mic Models
57 On Xs Shure® SM57 Dynamic, On Axis
421 Dyn Sennheiser® MD 421 Dynamic
12 Dyn AKG® D12
112 Dyn AKG® D112
20 Dyn EV® RE20
7 Dyn Shure® SM7B
40 Dyn Heil® PR40
47 Cond Neumann® U47
Editing Amp Parameters
To toggle the selected Amp model On or Off
ENTER
DBL PRESS TO ASSIGN CTL
MOVE
AMP & FX ON / OFF
Press the ENTER - AMP ON/OFF button once. Toggling the Amp “O” results in
bypassing the Amp, Cab and Mic processing.
To adjust the Amp Tone
Turn any of the Amp Tone knobs to adjust the desired settings for the selected Amp.
The Amp Tone knobs: DRIVE, VOLUME, BASS, MID, TREBLE and PRESENCE
*
All product names used in this manual are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were studied
during Line 6’s sound model development. Shure® is a registered trademark of Shure Incorporated, Sennheiser® is a registered trademark of Sennheiser Electronic Corporation, Neumann® is a registered trademark of Georg Neumann GMBH, Royer® is a registered trademark
of Bulldog Audio, Inc. DBA Rover Labs. AKG® is a registered trademark of Harman International Industries, Incorporated. EV® is a registered trademark of Electro-Voice, Incorporated. Heil® is a registered trademark of Heil Sound Ltd.