Owner's Manual

Amp, Cab & Mic Models
6•8
Page 1 of the Amp:Edit Screen - Amp A Bypassed
• With an Amp Model O: You’ll see only a VOL knob, as shown above for
Amp A. This is a separate parameter strictly for the Amp Model’s Bypass
Volume. Use the VOLUME knob on your device to adjust this, and its value is
stored separately with the Preset for whenever the Amp Block is Bypassed.
Note that the VOLUME knob does not control the level at all for a “Null” Amp Block.
• Use the Multi-Function knobs 1 - 4 to adjust the options at the bottom of
the screen:
• Knob 1: Select the desired Amp or Preamp Model.
• Knob 2: Select the desired Cab Model (also see the Page 4 options).
• Knob 3: Select the desired Mic Model (also see the Page 4 options).
• Knob 4: Choose between adjusting controls for Amp A or Amp B. (This option
is available on all AMP EDIT screens.)