Owner's Manual

FX Models
7•6
• Choosing a Hz value provides a specic modulation speed in cycles per
second.
• Choosing a Note Division value provides a time that is based on the current
Tap Tempo (see “Tap Tempo” on page 1•5)
• Mix: Sets the balance of the “Dry” and “Wet” signals. At 0% no eect is added to
your signal; at 100% you will hear the eected signal only. For most Filter FX, try
the 100% setting to achieve the full weirdness factor.
Pitch Models
Pitch Models - Parameter Reference Table
Model Parameters
Bass Octaver Tone Normal Octave -- --
Pitch Glide Pitch -- -- -- Mix
Smart Harmony Key Shift Scale -- Mix
Pitch FX Model Parameters
Since these FX are a bit more complex, we’ve provided examples of each Pitch FX
Model’s Edit Mode screen and parameter descriptions.
Bass Octaver
• Tone: The overall tone of the eect.
• Normal: Controls the volume of the dry signal.
• Octave: Controls the volume of the processed, octave signal.