Owner's Manual
FX Models
7•15
Before Path A & B split
Pan positioned before Path A & B split
When placed here, your guitar signal is panned left to Path A and right to Path
B. This can be a cool way to “blend” the sounds of two Amp models.
After Path A & B Mixer
Pan positioned after Path A & B Mixer
In this position, the stereo left & right signals fed into the Pan is determined
by your Mixer Pan settings. The Pan eect then pans these signal to the left
and right main outputs. Obviously, you’ll only benet from using the Pan in this
post-Mixer position when utilizing both the left and right outputs from POD HD
Pro X.
Placing a Mono Output FX Model after the Pan
Mono FX Model (EQ) positioned after Pan