Owner's Manual

Overview
1•4
Tuner Mode
To enter Tuner mode, press and hold the TAP button. A few options are available,
adjusted using the Multi-function knobs.
The Tuner screen
Note that the Tuner receives a signal only from the POD HD Pro X Input 1 source.
Pluck an individual string on your guitar and you’ll see the name of the note displayed.
When the graphic bar is to the left of center, your string is at; when it is to the right,
your string is sharp. When the bar is within the center range, triangles will appear
above and below it, indicating your string is in tune.
• Reference (Knob 1): If you’d like to tune to a reference other than standard
440Hz, select from 425 to 455Hz.
• Audio (Knob 2): Select Mute to silence POD HD Pro X output while tuning, or
select Bypass to hear your guitar dry.
Press the TAP switch, or any other button, to exit Tuner Mode.