Owner's Manual
Using the Looper
8•1
lOOper mOde
POD® HD Pro X includes a full-featured Looper Mode, which is accessible with
the connection of a Line 6 FBV™ Foot Controller. The Looper Mode oers up to 48
seconds of mono recording time (in Half-Speed Mode) or 24 seconds recording time
(in Normal Mode), as well as the ability to undo, record overdubs, playback Loops at
half speed, in reverse, and more! Footswitch assignments for Looper functions vary
among the supported Line 6 FBV Controller models - please see “Appendix B: FBV
Foot Controllers” on page B•1 for the details.
Looper Controls & Performance View
When Looper Mode is active, an additional Looper screen is available as one of the
Performance View displays of POD HD Pro X. This screen shows the behavior of
all Looper functions.* You can think of these as “this is what will happen when the
respective button is pressed” indicators. Press the VIEW button to show this screen
whenever you use the Looper. (Also see the Looper - Performance View options ,
“Page 1, Setup:Utilities Options” on page 2•2.)
The Performance View, Looper screen
*Note: The “Pre/Post” Looper Block position option is accessible with most FBV Controller devices,
or the Looper Block can be moved like any FX Model Block within the Signal Flow View screen.
To follow are descriptions of the functions shown in the Looper screen.