Owner's Manual
Using the Looper
8•3
RECORD/OVERDUB - To record a Loop, press the RECORD FBV footswitch and the Looper
will immediately start recording. You’ll see the Performance View display the following:
• The Record function shows “DUB IN.” Pressing the RECORD FBV
footswitch will immediately put you into Overdub-Record mode.
• If you press RECORD at this time, whatever you play will be recorded on
top of the original Loop recording, and you’ll see the Performance View
indicator show “DUB OUT.” Press the FBV footswitch again to stop
the overdub recording.
• The Play/Record function shows “STOP” to indicate that pressing
the PLAY/STOP FBV footswitch will stop playback & recording.
Note: Once you have a Loop recorded, you can layer an overdub on top of your current Loop
at any time. Simply play back the Loop and step on the REC/OVERDUB switch press the RECORD
FBV footswitch while the Loop is playing. Your new live guitar will be recorded on top of your
previously recorded Loop. You can repeat this step and layer as many overdubs as you like!
If you press RECORD while Loop playback is stopped, this will always record a new
Loop, and any previously recording will be discarded.
PLAY/STOP - Press the PLAY/STOP FBV footswitch to toggle Play/Stop for your recorded
Loop. If you are actively recording a Loop, press this switch to stop recording and set
your Loop “out” point. The button remains lit whenever playback is active.
• While playback is active, the Play/Stop icon appears as “STOP.”
1/2 SPEED - Press the 1/2 SPEED FBV footswitch to toggle the 1/2 Speed feature On/O.
Note that you can use the 1/2 Speed option for recording as well as playback. Specic behaviors
apply to each - please see “1/2 Speed Operation” on page 8•5.