Owner's Manual
USB Audio
9•5
Inputs & Recording Page
9
8
The Line 6 Audio-MIDI Settings window - Inputs & Recording page
8
Record Sends List: Displayed here are the Record Sends for the current Line 6
device that will be available to your audio software. For POD HD Pro X you’ll see the
one, stereo “1-2 Main Out” Record Send.
9
Hardware Monitor Level: This slider independently controls the volume of your
processed guitar tone output for monitoring (the signal fed to the device’s main
outputs). It does not aect the level of the signal fed to your computer via the Record
Send. This allows you to balance your guitar’s monitor level against the playback audio
from your computer, such as when recording in DAW software.
If using POD HD Pro X as the audio interface for recording into a DAW application, then your
DAW may also offer its own “software monitoring” function. You may want to use the DAW’s
software monitoring in some scenarios, such as if you want to hear your guitar signal processed
with plug-ins on the DAW track. When utilizing DAW software monitoring, you’ll want to set this
slider’s level to minimum to allow you to hear only the DAW software monitoring signal.