Owner's Manual
USB Audio
9•12
The Window Vista/7 Control Panel>Sounds>Properties - Advanced tab
6
ASIO® Driver Settings
• ASIO® Client: If you are running audio software that is using POD HD Pro X
as its ASIO® audio device, the name of the software will appear here.
• Buer Size: The ASIO® buer size in use, which will aect the
“responsiveness” and “latency” of the DAW software. The lower the setting,
the faster the response, but with the trade-o of higher processor usage and
the risk of audio dropouts. Raise the value if you are getting inconsistent
playback or recording in the audio software. 256 is generally a good setting
to start with.
• Bit Depth: The ASIO® bit depth in use. It is recommended to use 24-bit
here.
7
Sample Rate Converter Active - You’ll see this indicator light up whenever
the device is operating at a sample rate other than its native 48kHz rate. In addition
to 48kHz, POD HD Pro X supports 44.1kHz, 88.2kHz and 96kHz rates by utilizing an
internal sample rate converter.
8
USB Audio Streaming Buffer - This slider adjusts the buer size for the audio
responsiveness of the Input Monitoring signal. Basically, the default setting should
be ne for most systems, but if getting audio dropouts or working with large CPU
demands on your system, raise the slider a notch or two to the right until it alleviates
the problem.