Owner's Manual

Amp, Cab & Mic Models

5•2

Note that some of the classic ampliﬁers we modeled for POD HD family devices include knobs

other than the typical “Treble,” “Bass,” “Mid,” etc. In several cases, we’ve mapped these types

of controls to the POD HD Amp Tone knobs to retain the mojo of the original ampliﬁer. Please

see “Amp Control Knobs” on page 5•10.

About Default Amp Settings

Whenever you change to a different Amp or Preamp Model, predetermined Cab & Mic

models are automatically loaded, as well as Amp Tone Knob & Amp Edit Mode parameter

settings designed to complement the Amp type. But you can alternatively select your

desired settings for all these Amp options individually to customize and save your complete

Tone as a Preset (see the following sections)!

AMP Edit Mode

The AMP Edit Mode menu offers several options for customizing your Amp options. Press

the PRESETS knob to enter Edit Mode:

Use Up/Down to select

the next/previous AMP

parameter

Use Left/Right to navi-

gate to the AMP menu

Press the PRESETS

knob to enter or exit

Edit Mode

Rotate the knob to

change the setting for

the selected parameter

Amp Model Selection

In addition to using the Amp Model Select knob, as covered on page 5•1, you can

access all Amp Models from the Model menu here in the Amp Edit Mode screen. Note

that you’ll see several extra Amp Models available here are not found via the Amp Model

Select knob! See the table on page 5•8 for a list of all Amp Models.