Owner's Manual

FX Models
6•6
Particle Verb (POD HD400 Only)
This is a truly unique Reverb effect, so we’ve provided details on its parameters.
Turns your chords into a lush modulated pad in STABLE mode. CRITICAL mode is
similar, but with a slight rise in pitch. In HAZARD mode, all stops are removed.
• Dwell: Essentially a decay parameter, which adjusts the length of time the reverb
tail lasts.
• Condition: Choose between STABLE, CRITICAL and HAZARD here for some
different reverb experiences!
• Gain: Sets overall output level of the effect.
The following parameters are common to most EQ models:
• Frequency (as well as Low, Mid, High): Selects the center frequency or range for
the particular EQ Band. (The Graphic EQ includes “fixed” Bands where the gain is
adjustable for each.)
• Q: Adjusts the frequency width or shape of the frequency band lter.
• Gain: Adjust the output level of the particular Band. (The Gain parameters accessed
by Multi-function Knob #4 adjust overall level.)
The following parameters are common to most Filter models.
• Frequency: Selects the center frequency used by the effect.
• Q: Adjusts the frequency width of the lter in use.
• Depth & Speed: Adjusts the modulation intensity & rate (for those Filter FX that
include modulation).
• Mix: Sets the balance of the “Dry” and “Wet” signals. At 0% no effect is added to
your signal; at 100% you will hear the effected signal only. For most Filter FX, try the
100% setting to achieve the full weirdness factor.