Owner's Manual

Setup Details

1•1

Setup DetailS

In this chapter, we’ll cover the options found within the POD® HD300 & POD® HD400

Setup screen, calibrating your device’s on-board pedal, and performing a Factory Reset.

This Guide covers POD HD300 & HD400 devices with Flash Memory version 2.0 (or later)

installed. It is highly recommended to use Line 6 Monkey™ to install the latest available Flash

Memory version & all available updates - See “Appendix A: Line 6 Monkey™” on page

A•1

. Details throughout this Guide pertain to both POD HD300 & HD400, unless otherwise

noted.

Setup Options

The Setup screen is where you conﬁgure system settings for POD HD. Most options can be

left as-is after you’ve set them initially. They’ll be recalled each time you power-up and are

“global” (the settings persist regardless of the current Preset). To access the Setup options,

press the PRESETS knob, and use the Nav. Disc Left/Right arrow buttons to navigate to

the SETUP menu:

Use Up/Down to

select the next/previous

SETUP parameter

Use Left/Right to navi-

gate to SETUP menu

Press knob to enter

EDIT mode

Rotate the knob to

change the setting for

the selected parameter