Owner's Manual

FX Models
6•13
Depth
Adjusts the intensity of the pitch-modulation, wobble or throb, depending on the type of
effect. Higher settings yield more dramatic results.
Feedback
Many Mod & FX offer a Feedback option. This controls the amount of delayed signal that
is fed back into the effect. Higher settings can provide more dramatic textures.
Mix
Sets the balance of the “Dry” and “Wet” signals. At 0% you will hear strictly dry guitar; at
100% you will hear the effected signal only. For Chorus, Flanger & Phase FX, results are
typically best with the Mix set between 0 to 50%. For Vibrato, Tremolo, Pitch and Filter
FX, try the Mix at 90 - 100%. No rules here though, so feel free to experiment!
Note that the Script Phase and Pattern Tremolo FX2 models do not offer a Mix parameter.
Their dry/wet balance is “fixed,” just like the classic pedals that inspired them!
Common FILTER Swoosh Parameters
In addition to the above, following parameters are found in several of the FX2 Filter
Swoosh models:
• Frequency: Selects the center frequency for the lter(s) in use.
• Q: Sets the frequency width of the lters.