Owner's Manual
Appendix B: MIDI
B•3
To restore all Presets
If your selected SysEx le contains all 128 Presets (i.e. - you used the MIDI Dump “All”
setting above to create the le), you can send this data to POD HD to instantly replace all
its existing Presets:
Note: It would be a good idea to follow the MIDI Dump - Backing Up Presets settings before
proceeding if you want to backup your device’s existing Presets before permanently overwriting
them!
• There is no special “receiving mode” to select on POD HD - it will always receive
MIDI.
• Initiate the transfer of the selected SysEx file from within your MIDI software.
• Your software should indicate the progress of the transfer. It may take several seconds
to complete.
• Once complete, you should see and hear the new Presets loaded into all 128 Preset
locations of your device.
• It is not necessary to save the restored Presets - they are now permanently stored on
your device.