Quick Start Manual

10. 4 Way Nav Disc - Usedtomovethroughoptionsoncertainpagesin
your
Main Display.Presstheleftorrightsideofthe4WayNavwhen
is displayed next to an item to change settings. Press up and down
when
is displayed next to an item.
11. Presets Knob - Turn this knob to scroll through all of the stored presets.
Press the
PRESETS knob to enter Edit Mode.Hereyou'lldiscoverthe
power to deep edit effects as you make your way through the various
edit pages. Press
on the 4-WAY NAV to scroll through the edit
pages. Press
to move through the available edit parameters of each
page.Toeditaparameter,turnthePresetsKnob
to change values or
settings.
Let’spracticeeditingapreset(justbecausewecan)!We’regoingto
add a
Pitch Glide effect to our preset, and assign the pedal to control
it.It’seasy-promise!
• SpinthePRESETSKnobtopresetlocation06C. (You can also use
a combination of
Bank Up/Down commands via the footswitches
to get there) You are in
bank 6, location C. The Main Display
should read
T-Man Crunch as the preset name.
• Press the PRESETS Knob toenterEdit Mode. Press on the
4-way Nav until you see FX1 in the upper left hand corner of the
Display.ThecurrentlyloadedEffecttotherightofFX1 should
say
Screamer.
• Press the on the 4-way Nav until you see Model displayed on
the left in the lower line of the
Display. It will say Select to the
right of the
icon. Turn the PRESETSknob,andyou’llnotice
you are scrolling through the available effects in the
FX1 slot.
Keepturninguntilyouselect
Pitch Glide.
• Press the on the 4-Way Nav to see Routing. Turn the PRESETS
knob to select
Post.(You’vejustputthePitch Glide effect Post
amp modeling.)
• Press the on the 4-Way Nav to see Pedal. Turn the PRESETS
knob to display
Wah=Glide.(Now,whenyoupressthetoedown
on the pedal to switch modes, instead of the
Waheffectyou’llbe
controlling the
Pitch Glide)
• Press the on the 4-Way Nav to see Heel. This sets the amount
ofpitchshiftwhenthepedalisintheheeldownposition.Let’s
turn the
PRESETS knob to select -12.0 (semi-tones, or an octave
down)
• Press on the 4-Way Nav to To e . Turn the PRESETS knob to
+12.0 (semi-tones, or an octave up)
• Press the on the 4-Way Nav to see Mix. Turn the PRESETS
knob to set the
MIXlevelto100%.(Tip:HolddownthePRESETS
knob as you turn it to scroll through values more quickly!)
• Press the toe switch on the Expression Pedal so both WAH and
VOLLEDsarelitnexttothepedal.
You’ve just created a preset that glides from an octave down to an
octaveupwhenyourockthepedal.Youareamazing!Ifyouareinlove
withthissound(andwhowouldn’tbe!),besuretonameandsaveas
described below.